On Sale

Seco-Larm SK-910RBQ 1 Channel RF Receiver

Seco-Larm $42.95 $63.04 ((You save $20.09))

seco-larm-logo.jpg

  • Compatible with the SK-919TD1SUP or SK-919TD2A-U, as well as all other current SECO-LARM 315MHz transmitters.
  • Use to control garage door opener, house lights, alarm control panel, or other devices via remote control.
  • SK-910RBQ: FORM-C dry relay contact (NO/NC/COM) output. Rated 10 Amps at 24 VDC.
  • Frequency 315MHz.
  • This revolutionary receiver incorporates:
--1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
--2.HIGHER SENSITIVITY for greater operating distances.
--3.UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
--4.GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.
  • LED indicates RF reception, learn mode entered, transmitter learned, memory cleared.
  • Mode switch for easy transmitter learning.
  • Learns up to 15 transmitters.
  • 4 Output modes (programmable): 4-Second momentary, 1-Second momentary, Toggle, Latch.
  • Screw terminals for simple connection.

Specifications

Operating Frequency 315MHz
Operating Voltage SK-910RBQ: 11~24VAC/VDC
Operating Distance Up to 500ft (150m)*
Operating Temperature -4º~162º F (-20º~72º C)
Current Drain 15mA at 12VDC (LED flashing)
45mA at 12VDC (activated)
Sensitivity -87dBm (typical)
Data Format PWM
RF Codes 68 billion (SK-919TD1S-UP)
RF Channels One
Number of Stored Transmitter Codes Up to 15
Receiver Outputs SK-910RBQ: Form C dry relay contact (NO/NC/COM); max 10 Amp at 24VDC
Receiver Output Modes Programmable 4-sec. momentary (default), 1-sec. momentary, toggle or latch
Connectors 5 Quick-connect screw terminals (+, -, with NO/NC/COM)
Case Construction High-impact ABS plastic
Size 3.25"x2.7"x1.1" (83x68x27.5 mm)
Weight 2.6-oz (74gm.)
Approvals FCC

Operation

Mode switch
Enter Learn Mode Press and hold mode switch for 3 seconds. LED will flash fast.
Learn Transmitter Code Within 15 seconds of entering learn mode press transmitter button. LED will flash 1 time when button learned.
Clear Memory After entering learn mode, again press and hold the switch for 3 seconds. LED will flash twice to indicate memory clear.
Reset Latched Output Press mode switch momentarily and release.
LED Indicator
Steady ON RF reception (receiver is receiving RF signal from coded transmitter -- great for trouble shooting).
Fast Flash In code-learning mode.
One Flash A transmitter code is learned.
Two Flashes All learned codes are cleared.

*Actual range will vary greatly depending on the installation and operating environment.

Read more
Add to wishlist

Description

seco-larm-logo.jpg

  • Compatible with the SK-919TD1SUP or SK-919TD2A-U, as well as all other current SECO-LARM 315MHz transmitters.
  • Use to control garage door opener, house lights, alarm control panel, or other devices via remote control.
  • SK-910RBQ: FORM-C dry relay contact (NO/NC/COM) output. Rated 10 Amps at 24 VDC.
  • Frequency 315MHz.
  • This revolutionary receiver incorporates:
--1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
--2.HIGHER SENSITIVITY for greater operating distances.
--3.UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
--4.GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.
  • LED indicates RF reception, learn mode entered, transmitter learned, memory cleared.
  • Mode switch for easy transmitter learning.
  • Learns up to 15 transmitters.
  • 4 Output modes (programmable): 4-Second momentary, 1-Second momentary, Toggle, Latch.
  • Screw terminals for simple connection.

Specifications

Operating Frequency 315MHz
Operating Voltage SK-910RBQ: 11~24VAC/VDC
Operating Distance Up to 500ft (150m)*
Operating Temperature -4º~162º F (-20º~72º C)
Current Drain 15mA at 12VDC (LED flashing)
45mA at 12VDC (activated)
Sensitivity -87dBm (typical)
Data Format PWM
RF Codes 68 billion (SK-919TD1S-UP)
RF Channels One
Number of Stored Transmitter Codes Up to 15
Receiver Outputs SK-910RBQ: Form C dry relay contact (NO/NC/COM); max 10 Amp at 24VDC
Receiver Output Modes Programmable 4-sec. momentary (default), 1-sec. momentary, toggle or latch
Connectors 5 Quick-connect screw terminals (+, -, with NO/NC/COM)
Case Construction High-impact ABS plastic
Size 3.25"x2.7"x1.1" (83x68x27.5 mm)
Weight 2.6-oz (74gm.)
Approvals FCC

Operation

Mode switch
Enter Learn Mode Press and hold mode switch for 3 seconds. LED will flash fast.
Learn Transmitter Code Within 15 seconds of entering learn mode press transmitter button. LED will flash 1 time when button learned.
Clear Memory After entering learn mode, again press and hold the switch for 3 seconds. LED will flash twice to indicate memory clear.
Reset Latched Output Press mode switch momentarily and release.
LED Indicator
Steady ON RF reception (receiver is receiving RF signal from coded transmitter -- great for trouble shooting).
Fast Flash In code-learning mode.
One Flash A transmitter code is learned.
Two Flashes All learned codes are cleared.

*Actual range will vary greatly depending on the installation and operating environment.

Additional info

Width: 6.00
Height: 6.00
Depth: 6.00