On Sale

Securitron EEB2 Emergency Exit Button w/ 30 Sec. Timer

Securitron $103.12 $135.00 ((You save $31.88))

securitronlogo.gif

pdficon.pngInstallation Instructions

Model EEB2 is a two-inch square, exit button, mounted on a stainless steel (S.S.), single gang key plate. The EEB2 has a 3A switching capacity and a timer set for 30 seconds. These units are intended only for release of a magnetic lock from the inside of a door. When the button is pressed, the lock releases for 30 seconds. If pressed again during the 30-second lock release period, the unit will “retrigger” starting a new 30-second lock release period. These buttons are specifically intended for installation on access controlled egress doors, as described in the Building Officials and Code Administrators (BOCA) code. A motion detector, such as the Securitron Model XMS, is the primary means of magnetic lock release on the door. The EEB2 exit button is employed as a backup means of releasing the lock in case of a problem with the motion detector. It should be noted that the exact release time will vary with temperature, but it will not be less than 30 seconds

Features and Specifications

  • Emergency Exit Buttons offer additional safety, as required by code, for possible malfunction of motion exit sensor
  • Mounted next to door
  • Momentarily pressing the button releases door for 30 seconds
  • Retriggerable
  • Single Gang or Narrow Stile
  • SPST 3 Amp wet N/C contacts
  • Operates on 12 or 24 VDC (must be same voltage as the installed lock)
  • For indoor use only
  • EEB2 includes switchable green, red and blue ADA lenses
  • UL Listed
  • Includes a 30 second timer

securitroneeb2.png

Read more
Add to wishlist

Description

securitronlogo.gif

pdficon.pngInstallation Instructions

Model EEB2 is a two-inch square, exit button, mounted on a stainless steel (S.S.), single gang key plate. The EEB2 has a 3A switching capacity and a timer set for 30 seconds. These units are intended only for release of a magnetic lock from the inside of a door. When the button is pressed, the lock releases for 30 seconds. If pressed again during the 30-second lock release period, the unit will “retrigger” starting a new 30-second lock release period. These buttons are specifically intended for installation on access controlled egress doors, as described in the Building Officials and Code Administrators (BOCA) code. A motion detector, such as the Securitron Model XMS, is the primary means of magnetic lock release on the door. The EEB2 exit button is employed as a backup means of releasing the lock in case of a problem with the motion detector. It should be noted that the exact release time will vary with temperature, but it will not be less than 30 seconds

Features and Specifications

  • Emergency Exit Buttons offer additional safety, as required by code, for possible malfunction of motion exit sensor
  • Mounted next to door
  • Momentarily pressing the button releases door for 30 seconds
  • Retriggerable
  • Single Gang or Narrow Stile
  • SPST 3 Amp wet N/C contacts
  • Operates on 12 or 24 VDC (must be same voltage as the installed lock)
  • For indoor use only
  • EEB2 includes switchable green, red and blue ADA lenses
  • UL Listed
  • Includes a 30 second timer

securitroneeb2.png

Additional info

Width: 2.75
Height: 4.50
Depth: 3.00